Electrolytic (NON SH) - Motor Start Capacitor

  • Our N-MSC series are soft polyurethane filled, aluminium & plastic cased capacitors with wire and lug type construction.
  • All capacitors in this series conform to “NO PCB” , RoHS & REACH compliance.
  • These capacitors are normally used for ceiling fan , Table fan as well as coolers.

CONSTRUCTION:

  • Dielectric: polypropylene film
  • Plastic case with plastic top
  • Polyurethane resin
  • Dry type
  • Threaded stud at bottom of can (M8, max. torque = 5 Nm)
  • Plain can
  • Fast on terminals (single fast-on, double fast-on)
  • Flexible lead wire
  • Insulated cable or wire with sleeve

FEATURES:

  • Self-healing properties
  • Low dissipation factor
  • S0/P0 safety class
  • High insulation resistance

APPROVALS:

  • TECHNICAL SPECIFICATIONS
    Reference Standard IS 1709 / IEC 60252
    Rated Capacitance CN 1 uF to 10 uF
    Tolerance % + 5 %
    Safety Class S0 / P0
    Rated voltage VN 600 V
    Rated Frequency FN 50 / 60 Hz
    Rated Temperature Tmax 85 º C
    Life expectancy 440V, +85°C:10000 h
    Max. Ratings
    Max Permissible Voltage 1.1 x VN
    Max Permissible Current In 1.3 x In
    Max. Transient Inrush Current Handling
    Capacity    		 Is up to 200 x IR
    Test Data
    AC Test Voltage Terminal to Terminal Vtt 1.75 x UN, 2 Sec.
    AC Test Voltage between Terminals and Container Vtc 2000 V , 2s
    Insulation resistance Rins or time constant 
    at +20 °C, Rel. humidity max. value 85%,
    annual means <= 65%    		 Vtc 3000 V , 2s
    Dissipation factor tan at+ 20 °C <= 7.0 x 10-3 (1KHz)
    Climatic Category 25/85/21
    Lower Temperature Tmin º C – 25
    Highest Temperature T max º C + 70/85
    Damp Heat Test Ttset Days 21
    Design Data
    Plastic can & top disc material Plastic material as per IEC 60252-1

Electrolytic (NON SH) - Motor Start Capacitor

View other Motor Start Capacitors

Resin Filled
(SH) Motor Start Capacitors

1.50 – 4.00 µF

Know More